HighTempPressureCombined Pressure & Temperature Transducers
Capture pressure and medium temperature through one process connection while keeping electrical outputs and response requirements clear.
One process port, two measurements · configuration-specific review
HTP-DUAL identifies an RFQ configuration family. Final ratings and an issued drawing are agreed for the selected build.
Explore HTP-DUAL ↗
HTP-DUAL: conditions that determine the configuration
Pressure range/reference and required output
RTD class/wiring or thermocouple type and junction
Process thread, seal, insertion depth and available clearance
Media/ambient temperatures and separate response targets
Keep both measurements in the intended process zone
Request M14×1.5, 1/4 NPT or a drawing-defined connection. Confirm that the temperature element reaches the intended medium. A steam siphon or long cooling adapter can isolate the probe from the main flow and invalidate a combined temperature measurement.
One mounting port does not mean one signal
Specify the pressure output and temperature element separately: a conditioned pressure channel plus PT100 RTD or a K-type thermocouple is one possible arrangement. Wiring, excitation, cold-junction compensation and DAQ inputs must match the released configuration.
Temperature response follows probe geometry
Tip projection, thermowell mass and flow velocity affect temperature lag. The temperature measurement may not represent the instantaneous diaphragm temperature during rapid thermal transients. Agree insertion depth and permissible response time.
Choose the pressure architecture first
Hot static pressure may use a finned or isolated arrangement; a fast combustion-pressure requirement may need a different sensor chain. A combined housing alone does not establish high-frequency performance or a higher temperature rating.
Where HTP-DUAL fits the pressure duty
Thermal-fluid skids, engine development, hydraulic testing and hot process packages with limited mounting ports.
Independent pressure output + PT100 or K-type channel
Request configuration evidence →Accessories selected around the sensing technology
USD budget references. Final selection and commercial prices follow the reviewed RFQ.
Before specifying HTP-DUAL
Does the temperature band guarantee a supplied rating?
No. It describes an application selection route. Media, sensor-body, cable and electronics limits must be confirmed from the selected configuration documentation.
Can this replace an existing branded sensor?
Send the complete part number, installation drawing and electrical specification. Thread size alone does not establish equivalence in sealing, insertion depth, signal behavior or dynamic response.
What documentation should accompany the quotation?
Request a configuration datasheet, dimensioned installation drawing, wiring details, calibration scope and the evidence relevant to thermal duty and response.
Turn your thermal duty into a clear sensor RFQ.
Send media and ambient temperatures, pressure reference, dynamics and mounting requirements.
Request an engineering quote ↗