HighTempPressureHTP-DUAL — Combined Pressure & Temperature Transducers
Capture pressure and medium temperature through one process connection while keeping electrical outputs and response requirements clear.
One process port, two measurements · configuration-specific review
HTP-DUAL identifies an RFQ configuration family. Final ratings and an issued drawing are agreed for the selected build.
Configure your RFQ ↗
HTP-DUAL: conditions that determine the configuration
Pressure range/reference and required output
RTD class/wiring or thermocouple type and junction
Process thread, seal, insertion depth and available clearance
Media/ambient temperatures and separate response targets
Keep both measurements in the intended process zone
Request M14×1.5, 1/4 NPT or a drawing-defined connection. Confirm that the temperature element reaches the intended medium. A steam siphon or long cooling adapter can isolate the probe from the main flow and invalidate a combined temperature measurement.
Turn the family into an orderable configuration.
Start with the pressure range and reference, then define the output and excitation. Specify the connection, seat seal, diaphragm position and available envelope from the installation drawing. Media temperature, electronics ambient and exposure time are separate requirements.
For this dual family, provide the pressure output, PT100 wiring or thermocouple type, insertion depth, and the required pressure and temperature response times separately.
What the reviewed quotation should identify
Selected configuration code and ratings; issued dimensional and wiring drawings; calibration scope; agreed accessory part numbers; documentation and acceptance requirements; final price and delivery terms. Custom thermal or frequency requests require available evidence to be reviewed before order confirmation.
Where HTP-DUAL fits the pressure duty
Thermal-fluid skids, engine development, hydraulic testing and hot process packages with limited mounting ports.
Independent pressure output + PT100 or K-type channel
Request configuration evidence →Accessories selected around the sensing technology
USD budget references. Final selection and commercial prices follow the reviewed RFQ.
Before specifying HTP-DUAL
Does the temperature band guarantee a supplied rating?
No. It describes an application selection route. Media, sensor-body, cable and electronics limits must be confirmed from the selected configuration documentation.
Can this replace an existing branded sensor?
Send the complete part number, installation drawing and electrical specification. Thread size alone does not establish equivalence in sealing, insertion depth, signal behavior or dynamic response.
What documentation should accompany the quotation?
Request a configuration datasheet, dimensioned installation drawing, wiring details, calibration scope and the evidence relevant to thermal duty and response.