HighTempPressureHTP-WC1000 — Water-Cooled Dynamic Pressure Sensors
Keep the sensing element separated from the heat load while measuring combustion pressure and fast pulsations. Define the thermal exposure and the measurement chain together.
800–1,500°C+ hot-gas projects · configuration-specific review
HTP-WC1000 identifies an RFQ configuration family. Final ratings and an issued drawing are agreed for the selected build.
Configure your RFQ ↗
HTP-WC1000: conditions that determine the configuration
Normal and peak pressure; gauge, absolute or dynamic reference
Gas temperature, exposure duration, heat flux and cooled-body limits
Coolant conditions and shutdown behavior
Flushness, seat seal, installation torque and dimensional drawing
Define hot-gas exposure and the cooling boundary
Requests may include 20–200 kHz useful bandwidth, 50–300 kHz natural resonance, ranges from 0–1 to 0–100 MPa, or transient gas exposure toward 2,000°C. These are separate engineering inputs, not a combined available rating. Confirm coolant-jacket pressure, cleanliness, chemistry and heat load. Review leakage consequences for the medium and define cooling during startup, heat exposure and post-shutdown heat soak.
Turn the family into an orderable configuration.
Start with the pressure range and reference, then define the output and excitation. Specify the connection, seat seal, diaphragm position and available envelope from the installation drawing. Media temperature, electronics ambient and exposure time are separate requirements.
For this cooled family, provide coolant inlet temperature, flow and pressure, gas exposure and the target flat bandwidth. Identify bridge or charge sensing before selecting an amplifier.
What the reviewed quotation should identify
Selected configuration code and ratings; issued dimensional and wiring drawings; calibration scope; agreed accessory part numbers; documentation and acceptance requirements; final price and delivery terms. Custom thermal or frequency requests require available evidence to be reviewed before order confirmation.
Where HTP-WC1000 fits the pressure duty
Rocket propulsion tests, scramjet combustion development, cylinder knock research and gas-turbine thermoacoustics.
Bridge mV/V or charge output; matched wideband conditioning
Request configuration evidence →Accessories selected around the sensing technology
For bridge-output probes only. State the required DC–100/200 kHz target, excitation, cable and BNC output; final bandwidth and price require review.
For charge-mode probes only. Confirm pC range, low-frequency cutoff and upper bandwidth.
Confirm coolant pressure, local hose temperature and fitting/seat dimensions.
Budget reference only; active refrigeration, heat rejection and pump capacity require a separately confirmed configuration and price.
USD budget references. Final selection and commercial prices follow the reviewed RFQ.
Before specifying HTP-WC1000
Does the temperature band guarantee a supplied rating?
No. It describes an application selection route. Media, sensor-body, cable and electronics limits must be confirmed from the selected configuration documentation.
Can this replace an existing branded sensor?
Send the complete part number, installation drawing and electrical specification. Thread size alone does not establish equivalence in sealing, insertion depth, signal behavior or dynamic response.
What documentation should accompany the quotation?
Request a configuration datasheet, dimensioned installation drawing, wiring details, calibration scope and the evidence relevant to thermal duty and response.