HighTempPressureHTP-FIN — Industrial High-Temperature Pressure Transmitters
Separate hot steam, thermal oil or process fluid from the transmitter electronics with a suitable cooling-fin tower, standoff or isolation arrangement.
200–450°C process targets · configuration-specific review
HTP-FIN identifies an RFQ configuration family. Final ratings and an issued drawing are agreed for the selected build.
Configure your RFQ ↗
HTP-FIN: conditions that determine the configuration
Continuous and cleaning-cycle temperatures, ambient and installation orientation
Wetted alloy, corrosion compatibility and diaphragm style
Pressure range, overload, loop supply and load
CIP/SIP duration, sanitary seal and finish where relevant
Choose the sensing element and isolation arrangement
Sputtered thin-film and silicon-on-sapphire are possible sensing routes. Heavy fuel oil and 150–200°C CIP/SIP duties need their own material, seal and cycle review. A remote seal also needs fill-fluid and vacuum/temperature compatibility checks. Do not assume a 350°C process will produce electronics below 65°C without installation-specific evidence.
Turn the family into an orderable configuration.
Start with the pressure range and reference, then define the output and excitation. Specify the connection, seat seal, diaphragm position and available envelope from the installation drawing. Media temperature, electronics ambient and exposure time are separate requirements.
For this industrial family, provide loop supply/load, wetted-material compatibility, continuous and cleaning-cycle duty, and orientation/airflow around the cooling body.
What the reviewed quotation should identify
Selected configuration code and ratings; issued dimensional and wiring drawings; calibration scope; agreed accessory part numbers; documentation and acceptance requirements; final price and delivery terms. Custom thermal or frequency requests require available evidence to be reviewed before order confirmation.
Where HTP-FIN fits the pressure duty
Superheated steam, thermal-oil heaters, hot hydraulics, geothermal process skids and autoclave monitoring.
4–20 mA / 0–10 V; optional protocols by selected configuration
Request configuration evidence →Accessories selected around the sensing technology
Request M20×1.5, G1/2 or 1/2 NPT as applicable; review pressure and temperature derating.
USD budget references. Final selection and commercial prices follow the reviewed RFQ.
Before specifying HTP-FIN
Does the temperature band guarantee a supplied rating?
No. It describes an application selection route. Media, sensor-body, cable and electronics limits must be confirmed from the selected configuration documentation.
Can this replace an existing branded sensor?
Send the complete part number, installation drawing and electrical specification. Thread size alone does not establish equivalence in sealing, insertion depth, signal behavior or dynamic response.
What documentation should accompany the quotation?
Request a configuration datasheet, dimensioned installation drawing, wiring details, calibration scope and the evidence relevant to thermal duty and response.